‧AC‧M225GAP (68)
225x240x80mm/8.9x9.5x3.1inch
620 CFM
Sinwan IP68/IP69K AC Metal Impeller
  Rated
Volt		 Voltage
Range 		Freq Input
Power 		Ref.
Speed 		Max.Airflow Max.Static Pressure Noise
Level 		PQ UL
Model No VAC VAC Hz Watt

RPM

 CFM m3/min Inch/H2O mm db(A)    
M225GAP11-1** (68) 115 100~120 50/60 60/80 2700/3100 540/620 15.3/17.6 0.8/0.74 20.32/18.8 66 2/1 £
M225GAP11-2** (68) 115 100~120 50/60 55/65 2300/2250 460/450 13/12.7 0.68/0.52 17.27/13.21 54 4/3 £
M225GAP11-3** (68) 115 100~120 50/60 20/30 1550/1650 310/330 8.8/9.3 0.38/0.31 9.65/7.87 48 6/5 £
M225GAP11-4** (68) 115 100~120 50/60 18/25 1200/1100 240/220 6.8/6.2 0.21/0.14 5.33/3.56 37 8/7 £
M225GAP11-1/2** (68)
(dual speed -1 & -2)
 115 100~120 50/60 -1 60/80
-2 55/65 		2700/3100
2300/2200 		540/620
460/450 		15.3/17.6
13/12.7 		0.8/0.74
0.68/0.52 		20.32/18.8
17.27/13.21 		66
54 		2/1
4/3 		£
M225GAP11-3/4** (68)
(dual speed -3 & -4) 		115 100~120 50/60 -3 20/30
-4 18/25 		1550/1650
1200/1100 		310/330
240/220 		8.8/9.3
6.8/6.2 		0.38/0.31
0.21/0.14 		9.65/7.87
5.33/3.56 		48
35 		6/5
8/7 		£
M225GAP22-1** (68) 230 200~240 50/60 60/80 2650/3000 540/620 15.3/17.6 0.8/0.74 20.32/18.8 66 2/1 £
M225GAP22-2** (68) 230 200~240 50/60 55/65 2300/2250 460/450 13/12.7 0.68/0.52 17.27/13.21 54 4/3 £
M225GAP22-3** (68) 230 200~240 50/60 20/30 1550/1650 310/330 8.8/9.3 0.38/0.31 9.65/7.87 48 6/5 £
M225GAP22-4** (68) 230 200~240 50/60 18/25 1200/1100 240/220 6.8/6.2 0.21/0.14 5.33/3.56 37 8/7 £
M225GAP22-1/2** (68)
(dual speed -1 & -2) 		230 200~240 50/60 -1 60/80
-2 55/65 		2700/3100
2300/2200 		540/620
460/450 		15.3/17.6
13/12.7 		0.8/0.74
0.68/0.52 		20.32/18.8
17.27/13.21 		66
54 		2/1
4/3 		£
M225GAP22-3/4** (68)
(dual speed -3 & -4) 		230 200~240 50/60 -3 20/30
-4 18/25 		1550/1650
1200/1100 		310/330
240/220 		8.8/9.3
6.8/6.2 		0.38/0.31
0.21/0.14 		9.65/7.87
5.33/3.56 		48
35 		6/5
8/7 		£
M225GAP8-1** (68) 48 48~58 50/60 60/80 2700/3100 540/620 15.3/17.6 0.8/0.74 20.32/18.8 66 2/1 £
M225GAP44-1** (380)(68) 380 380~440 50/60 60/80 2700/3100 540/620 15.3/17.6 0.8/0.74 20.32/18.8 66 2/1 £
M225GAP44-1** (440)(68) 440 380~440 50/60 60/80 2700/3100 540/620 15.3/17.6 0.8/0.74 20.32/18.8 66 2/1 £
  • ** = "WB" for Wire lead type, Ball bearing. "TB" for push-in Terminal pin type, Ball bearing or Terminal block connecting with Ball bearing.
  • 100, 200, 240V or special voltages 12, 24, 28, 38, 42, 48, 380~440~480... 50/60Hz, & dual voltage version available on request.
  • Dual speed High/Medium 1/2, High/Low 1/3, Medium/Low 2/3, Low/extra Low 3/4 or triple speed 1/2/3 available on request.
  • Sinwan reserves the right to change data and improve electrical or mechanical design without notice, data tolerance +-10%
    •  
      Motor Type: Capacitor induction, outer rotor, 1phase, Sinwan Motor MEA180G UL/CU approved E329400
      Burnout Protection: Thermally protected
      IP Protection: IP68 or IP69K optional on request
      Frame: Aluminum die cast, black color
      Impeller: 7 blades, all metal
      Bearing: Two ball bearings
      Rotation: CCW seen on rotor, air direction
      Connection: Wire leads or terminal block pin connecting
      Weight: 2180g
      Dielectric Strength: Over 1 min. at 1,500 VAC, 50/60Hz
      Insulation Resistance: Over 100 MΩ at DC 500V
      Signal Output: Optional: Tachometer F/G , motor slowing down alarm R/D output.
      Operating Temp: Ambient non-condensing -30~+80C
      Storage Temp: -40C~+100C (at 65%RH)
      Life Expectancy: L10 45K hours at 55C

     

    Metal Fan Guard
    G225 Series